Pressure Treated Garden Arch 980 - FSC® Certified

• All timber used in the construction of this product originates from sustainable forests
• Only the products described as FSC are FSC Mix 70%, certificate code INT-COC-003944, licence number FSC-C109654
• To verify our FSC membership visit the FSC Member Search and search for Summer Garden (full name "Summer Garden and Leisure Buildings Ltd")
• Pressure treated throughout (lifetime preservative treatment)
• Timber sizes are nominal i.e. before machining, unless described as finished size
• Scandinavian redwood or whitewood
• All timber used in the construction of this garden bench originates from sustainable forests in Northern Europe
• Corner posts ex 2"x2" (finished size 40mm x 40mm)
• Rafters ex 2"x1" (finished size 50mm x 17mm)
• 2 diamond trellis panels
• Diagonal corner braces
• Pergola style roof
• Smooth planed finish
• Prefabricated pieces for simple assembly
• Adjustable width by moving the corner posts
• Maximum internal archway opening approximately 4'11" (1500mm)
• Overall width approximately 5'3" (1600mm)
• Overall depth approximately 1'10" (550mm)
• Overall height approximately 6'11" (2100mm)

PRESSURE TREATED TIMBER: Pressure treatment is a lifetime preservative treatment. The preservative is forced deep into the timber under pressure in a vacuum and penetrates below the surface. All other treatments apply a coat of stain to the surface of the timber only. With pressure impregnated timber, the chemicals are permanently bonded to the cell structure of the wood at a molecular level. Tanalith E is a widely used water based version so pressure treated wood is often described as tanalised. Pressure treated wood is almost colourless except for a slight green tint caused by the copper content in the preservative. No further preservative treatment is ever needed. However, if you want a coloured finish you can paint over pressure treated or tanalised wood with normal wood preservative in any colour.

SCANDINAVIAN REDWOOD OR WHITEWOOD: The most widely used timber in the UK for years, Scandinavian Redwood and Whitewood grow in the well managed forests of Scandinavia and the coldest parts of Northern Europe. The cold climate ensures slow growth. The growth rings are much closer together than faster growing trees from warmer climates. As a result the timber is heavy and durable with a close grain pattern. The wood is seasoned and kiln dried to achieve the correct moisture content before it is machined. Redwood and Whitewood are so similar in appearance and performance that it is difficult to tell the difference. Both are classified as slightly durable and treatment is required for outside use. The forests of Scandinavia and Northern Europe have been responsibly managed on a sustainable basis for centuries so Scandinavian Redwood or Whitewood is an enviromentally friendly choice.

FSC® CERTIFIED TIMBER: By choosing this product, you are supporting responsible management of the world's forests. This product is FSC certified. Our FSC licence number is FSC-C109654. Our FSC chain of custody certificate code is INT-COC-003944. To verify our membership visit FSC Member Search and search for Summer Garden (full name "Summer Garden and Leisure Buildings Ltd"). Please note if you want a genuine FSC certified product it must include a valid FSC claim, which must include a valid licence number and/or certificate code from a genuine FSC member. It must also be described as FSC 100% or FSC Mix Credit or FSC Mix 70%. Claims that "we use FSC timber" or "our suppliers are FSC certified" are dishonest, because the FSC certifies products and not suppliers. If the claim is invalid the timber is not FSC certified.

ABOUT THE FSC®: The FSC or Forest Stewardship Council is a non profit organization which promotes responsible forest management throughout the world. Since 1994 the FSC has certified over 190 million acres of forest in over 80 countries. The FSC confirms that the forest is being managed in a way that preserves the natural ecosystem and benefits the lives of local people and workers but also sustains economic viablility. FSC certification ensures that forests are responsibly managed by protecting plant and animal species, the rights of indigenous people and the safety of forest workers. FSC chain of custody certification verifies that FSC-certified material has been identified and separated from non-certified and non-controlled material at every step throughout the supply chain.

SAFETY: This product should be placed on a flat, level and hard base. Concrete and paving are ideal. Lawns are often too soft, but may be suitable with care. Children should not be allowed to climb on this product or to play around it without adult supervision. Jumping on this product is not recommended. Adults should sit down without excessive force. During the winter months and periods of adverse weather we recommend covering this product or storing it under cover.

• Base anchor kits
• Timber sleepers, ex 4"x8", approximately 8' long, in a choice of colours
• A selection of microporous wood preservatives in a wide choice of colours

BASE ANCHORS: Our base anchor kits are designed to fix timber products firmly into a concrete or paving base. Sufficient brackets and fixings are supplied to securely fix the main supports down into the base. As a minimum, our 2 pack features 2 base anchors to fix down 2 of the supports, normally at opposite corners. Our 4 pack features 4 base anchors to fix down the supports at 4 corners. The kit includes wood screws to fix the brackets into the timber and hammer fixings to fix down into the base. The brackets feature pre-drilled holes. Drill bits are not included. If you plan to fix your product into a timber or decking base you should replace the hammer fixings with woodscrews.

TIMBER SLEEPERS: These chunky railway sleepers can be used in a number of different landscaping projects in your garden, such as dividing walls, edging, steps, as bearers or foundation beams under garden buildings, and so on. The overall size is approximately 100x200mm and 2400mm long (approximately 8ft), though they can be cut to suit on site if required. They have been pressure treated for added longevity. Pressure treatment is a lifetime preservative treatment.

MICROPOROUS PRESERVATIVE - DELIVERED TO YOUR DOOR: Our quality microporous preservatives are impervious to water but not to water vapour. This allows the wood to breathe. You can order up to 3 separate colours if required. At least two coats are normally required with a further coat at periodic intervals.

Our 3 star preservative is practical and affordable with a choice of 4 colours. It covers around 10 square metres per litre and normally lasts 1-2 years before a further coat is required.

Our 4 star preservative is a high quality preservative which covers around 9 square metres per litre and normally lasts 2-5 years before a further coat is required. It is available with a choice of 12 colours.

Our 5 star preservative is a deluxe high build preservative which can be used to achieve a stunning finish. Each extra coat increases the colour and sheen. It covers around 8 square metres per litre and normally lasts 2-5 years before a further coat is required. It is available with a choice of 12 colours.

Based on average coverage five litres of our 4 star preservative is enough for two coats on an 8'x10' shed or an 8'x8' log cabin. Ten litres is enough for three coats on a 10'x16' shed or a 12'x10' log cabin. Coverage varies according to the smoothness of the surface and the porosity of the timber. We recommend that you order more than you need to be sure that you have easily enough. All of these preservatives are safe for use with children and pets. These microporous preservatives are only available when you purchase a Summer garden building or if you purchased a Summer building in the past. Prices include free mainland delivery to England, Wales and southern Scotland. Colours are only as accurate as reproductive techniques allow.

WATERPROOF COLOUR SEAL - DELIVERED TO YOUR DOOR: This advanced water-based microprous timber treatment uses the latest high-tech nanotechnology to create a long-lasting waterproof wood coating that is environmentally friendly. It is suitable for use on all softwood and hardwood products and is especially recommended for use on pressure treated timber, including sheds, summerhouses, gazebos, fencing and garden furniture. This timber treatment will colour, protect and enhance your exterior wood. It contains a mould inhibitor to protect the coating and can be used on all outside and inside timber. It gives a traditional matt wood stain finish in a range of natural colours. It can easily be applied by sprayer, brush or roller. It is recommended that the second coat is applied as soon as the first coat is touch dry. We advise for ultimate performance the timber has a wood preservative pre-treatment. For the first treatment, two coats are recommended and will give a traditional wood stain finish that is long lasting. A further coat is recommended every 2-5 years. One litre covers approximately 10-12 square metres. Coverage varies according to the smoothness of the surface and the porosity of the timber. On average five litres covers a 12x8 shed with two coats and ten litres covers a 10x20 with three coats. It is recommended that 2 coats be applied. We recommend that you order more than you need to be sure that you have easily enough. The appearance of colours and shades may vary between different screens or devices. Prices include free mainland delivery to England, Wales and southern Scotland.

WATERPROOF CLEAR SEAL - DELIVERED TO YOUR DOOR: Our hardwearing clear seal is ideal as a clear varnish for bare timber or as a waterproof top coat for painted wood and pressure treated timber. It is also ideal as a waterproof floor varnish, especially the polyurethane clear seal. The smooth and shiny finished surface is waterproof and easy to clean. Available in a choice of acrylic or polyurethane, these colourless water based coatings are almost odourless and recommended for smooth planed timber only. One coat is normally required as a sealing top coat on painted or treated timber. A minimum of two coats are normally required on untreated wood. Up to three coats may be required for floors. An unsealed timber floor quickly shows muddy boot marks and other dirt. For best results a floor should be treated at the earliest opportunity while the timber is new and clean. On average five litres of our 5 star clear seal is enough for three coats on a 12'x12' floor, two coats on the walls of an 8'x8' log cabin or one coat on the walls of a 12'x16' log cabin. We recommend that you order more than you need to be sure that you have easily enough. The price includes free mainland delivery to England, Wales and southern Scotland.